THE XCLUDED STANDARD

PRIMA.

Nano Ceramic Window Film.

A refined finish. Enhanced privacy. Everyday driving comfort.

ENGINEERED FOR EVERYDAY DRIVING

More than a darker window.

PRIMA inorganic nano-ceramic film combines a refined neutral-black finish with shade-specific UV and solar-control performance.

99%

UV rejection

All four listed PRIMA shades

70–85%

Infrared rejection

Manufacturer shade-specific IRR

45–50%

Solar energy rejected

Manufacturer shade-specific TSER

Figures supplied in ZR Films PRIMA technical material shared with XCLUDED. Results vary by shade and test conditions. UV, IRR and TSER measure different properties; infrared rejection is not total heat rejection.

FIND YOUR FINISH

Four shades. One standard.

From bold privacy to a more understated finish. Lower VLT means less visible light passes through the film. These are manufacturer film specifications, not guaranteed finished-window readings.

PRIMA 05

5% LIMO DARK

A striking, very dark appearance.

Film VLT
6%
IR rejection
85%
TSER
50%

PRIMA 15

15% DEEP DARK

A deep, distinctive finish.

Film VLT
15%
IR rejection
80%
TSER
48%

PRIMA 20 · XCLUDED SIGNATURE

20% SIGNATURE DARK

Our preferred balance of attitude and finish.

Film VLT
21%
IR rejection
70%
TSER
46%

PRIMA 35

35% REFINED

Subtle, considered styling.

Film VLT
36%
IR rejection
80%
TSER
45%

Each shade is listed by ZR Films at 1.8 mil thickness and 99% UV rejection. Actual VLT of installed glass and film may differ. Not every shade is legal for every window or vehicle; suitability is assessed before installation. Shade availability is subject to stock.

FOR THE DETAIL-OBSESSED

Behind the numbers.

The manufacturer's published figures, without the marketing guesswork.

View PRIMA technical specifications
ZR Films PRIMA series published performance figures
ModelFilm VLTUVRIRRTSERHazeThickness
PRIMA 056%99%85%50%1.85%1.8 mil
PRIMA 1515%99%80%48%1.63%1.8 mil
PRIMA 2021%99%70%46%1.47%1.8 mil
PRIMA 3536%99%80%45%1.63%1.8 mil

VLT: visible light transmission · UVR: ultraviolet rejection · IRR: infrared rejection · TSER: total solar energy rejected. These values come from supplier product information and are not independent XCLUDED test results.

KNOW WHAT YOU'RE CHOOSING

The details matter.

A little knowledge makes choosing your tint easier. Here's what the numbers mean — and what to ask before deciding.

01 / VISIBLE LIGHT

What does 35%, 20% or 5% mean?

VLT stands for visible light transmission: the percentage of visible light that passes through the glass and film together. A lower percentage means a darker result. The final VLT depends on the existing glass as well as the film.

Darkness affects privacy and outward visibility, particularly at night. The darkest option isn't necessarily the best option for every vehicle.

02 / HEAT & COMFORT

Not all heat figures are equal.

Infrared rejection (IR) describes performance against a particular part of the infrared spectrum. Total solar energy rejected (TSER) considers the sun's energy more broadly, including visible and ultraviolet wavelengths.

When comparing films, check the test method and the specific shade. A headline IR figure alone doesn't tell the whole story.

03 / UV PROTECTION

UV and heat are different.

UV rejection measures how much ultraviolet radiation is blocked under a stated test method. It is not the same measurement as heat rejection or VLT. For the precise performance of a PRIMA shade, refer to the manufacturer's current technical data.

04 / CHOOSING A SHADE

Looks, visibility and legality.

Queensland vehicle tint requirements vary by window position and vehicle circumstances. We discuss suitable options before installation and check applicable requirements rather than assuming every shade is road legal.

A lighter film can still offer solar-control benefits; appearance and performance aren't always tied to darkness.

05 / AFTER INSTALLATION

Give the film time to settle.

Newly installed film can show temporary moisture or haze while it dries. Curing time depends on conditions and the product used. Follow the care instructions provided with your installation, including when it's safe to lower the windows and clean the glass.

06 / PRODUCT DETAILS

Ask for the actual numbers.

Our PRIMA shade comparison above includes manufacturer-published VLT, UV rejection, infrared rejection and TSER figures. We confirm product availability and warranty documentation before installation.

Performance figures above are from ZR Films PRIMA product material. Confirm the film model, final glass-and-film VLT, current supplier documentation and Queensland requirements for your vehicle before installation.

GOOD QUESTIONS. CLEAR ANSWERS.

Frequently asked questions.

A few things worth knowing before choosing your finish. Select a question to see the answer.

What does 35%, 20% or 5% tint actually mean?

These numbers refer to visible light transmission (VLT). Lower percentages let less visible light through. The finished window's VLT depends on both the film and the glass already fitted to your vehicle.

Does darker tint mean better heat rejection?

Not necessarily. Darkness and solar performance are different properties. When comparing films, look at shade-specific total solar energy rejected (TSER) figures rather than judging performance by appearance alone.

What's the difference between UV and infrared rejection?

UV rejection describes how much ultraviolet radiation is blocked under a stated test method. Infrared rejection describes performance across a specified infrared range. Neither figure alone tells you the film's total solar heat performance.

Which tint shade is legal in Queensland?

Queensland's requirements depend on the window position and vehicle circumstances, and the limit applies to the finished glass-and-film combination. We'll discuss applicable requirements before installation rather than treating every advertised shade as road legal.

Can I wind down my windows straight after tinting?

Fresh film needs time to cure. Follow the specific aftercare instructions supplied at installation, including when to lower your windows and how to clean the glass. Drying time can vary with weather and the product used.

Will small bubbles or haze disappear?

Some temporary moisture or haziness can be normal during curing. If marks persist beyond the advised curing period, or you notice lifting or contamination, contact us so we can assess them.

What warranty comes with PRIMA film?

ZR Films describes PRIMA as having a limited lifetime warranty against fading, delamination, bubbling and cracking. Eligibility, exclusions, claim procedures and any installation workmanship coverage depend on the written terms supplied for your job; ask XCLUDED to confirm these before booking.

Film data is based on ZR Films PRIMA material supplied to XCLUDED. Legal suitability, warranty terms and aftercare instructions are confirmed for each installation.

Find your finish.

Explore your options and request an appointment.

GET AN ESTIMATE REQUEST AN APPOINTMENT